manual
Blop
Prepare the tools for assembling the BLOP hanger.
To install the hanger efficiently, you will need: a drill with a 6 mm bit or a screwdriver with a drilling function, a screwdriver, a pencil, and an Allen key.
START
Prepare the tools for assembling the BLOP hanger. To install the hanger efficiently, you will need: a drill with an 8 mm bit or a screwdriver with a drilling function, a pencil, and the double-threaded screw included in the BLOP package.).
STEP 1
Mark the spot on the wall with a pencil where you want to install the BLOP.
STEP 2
Drill a hole in the wall to the full depth of the wall plug (make sure to drill perpendicular to the wall using an 8 mm bit matching the plug diameter).
STEP 3
After drilling the hole, insert the wall plug. Set it so that its collar is flush with the wall.
STEP 4
Screw the double-threaded screw, which you’ll find in the package, into the bottom of the BLOP using the blunt end (as shown in the diagram).
STEP 5
Screw the BLOP with the attached screw into the wall plug that was previously inserted into the wall.
STEP 6
If you have more than one BLOP, repeat the steps above and create your own composition on the wall.
STEP 7
Ready!
