This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

CRAFTED, THAN PAID
Pay 20% Now. The Rest When It's Ready

manual

Une

Prepare tools for mounting the UNE hanger.
To mount the hanger efficiently, you will need:
#6 drill or screwdriver with drill function, screwdriver, pencil and Allen key.


START

The UNE hanger is packed in a package that will serve you as a template
for assembly. At the bottom of the box you will find two marked points,
with which you can easily mark the places of drilling on the wall.

STEP 1

Place the box on the wall where the hanger is to be installed.

STEP 2

In the marked places, drill a hole in the wall to the full depth of the
plug (perpendicular to the wall with a drill with a diameter of 8 mm).

STEP 3

Drill a hole in the marked place to get a hole suitable for an 8mm
expansion plug. The hole must be deeper by about 5-8mm than the length
of the pin.

STEP 4

After drilling the top hole, insert the mounting pin into it. Set it so that its flange is flush with the wall.

STEP 5

In the UNE set you will find two black wall brackets.

STEP 6

Using a screwdriver, screw them into the previously installed pins, in the marked hanger mounting locations.

STEP 7

Slide the UNE hanger onto the two mounted handles in the mounting position.

STEP 8

The UNE set also includes two small screws, which you can use to screw the UNE hanger to the wall brackets using an Allen key.

STEP 9

Enjoy the UNE hanger in your home.